manualshive.com logo in svg

Muratec F-160, Operating Instructions Manual

Share
Download
Muratec F-160 Operating Instructions Manual Download Page 49

Beyond the basics

2.17

Take advantage of lower evening and weekend long-distance rates with delayed
transmission. Your fax machine can store up to 99 delayed commands, each of which
you can program up to 31 days in advance.

Important: If you program all 99 delayed transmission commands, no further

memory transmission is possible until one or more of the commands is
completed. (To review memory transmission, see pages 1.14–1.15.)
However, if all 99 delayed commands are programmed, you can always
transmit manually using monitor/speaker dialing or an optional hand-
set (see page 1.16).

Setting up a delayed transmission

Important: Your machine only remembers the day of the month that it’s supposed

to send a delayed transmission. It does not remember the month
itself. So if you want to send a transmission at 5:05

PM

on June 26,

don’t program the transmission sooner than 5:06

PM

on May 26.

To set up a delayed transmission:

1

Insert the document and make any necessary adjustments.

2

Press 

COM

-

OPTIONS

. The 

LCD

shows:

3

Press 

ENTER

. The 

LCD

shows the current day of the month, followed by the

current time (in 24-hour format):

4

Use the numeric keypad to enter the day of the month and the time when you
want the fax to send the delayed transmission.

Note: Press

to move the cursor left, or  /

PROGRAM

to move it right.

Here, we’ve set the transmission to occur on the 11th at 11:05 

PM

:

5

When the date and time are entered, press 

ENTER

to save the delayed trans-

mission. The 

LCD

shows:

6

Enter the fax number for the delayed transmission document. You can either
press a one-touch key, enter a speed-dial number or use the numeric keypad
to enter the fax number.

Note: If you want to erase characters, press 

CANCEL

to erase to the left.

If you want to change just one character in the number, press

to

move the cursor left, or  /

PROGRAM

to move it right. Press 

CANCEL

to

erase it. Then re-enter the number correctly.

7

Press 

START

. Your machine returns to standby mode, while showing this on

the 

LCD

:

This means your fax machine is “reserved” for the delayed transmission you
just programmed.
• If you set the machine for memory transmission, it will scan the document

into memory, after which you can use the machine normally.

• If you set the machine for manual transmission, the machine can receive

faxes but can’t transmit until your delayed command has been performed.

Important: If you’ve stored too much information in your machine’s memory, a

“Memory Overflow” message may appear on the 

LCD

. This appears

because (1) too many pages have been stored in the memory, or (2)
the pages that are stored have too much information on them for your
fax machine to remember.
If this message appears, press 

START

to tell your fax to keep as many

pages in memory as possible, or press 

CANCEL

to delete from memory

all pages stored during the current operation (but not previous opera-
tions).

** Reserved **

Sep 29 1999  17:17

Enter Fax Number
_

Delayed
Enter Time: 11/23:05

Delayed
Enter Time: 06/17:16

1.Delayed

Program/Enter

Delayed transmission

Summary of Contents for F-160



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands