17
© Munters AB, 201
8
3.9 Plumbing kit components for distribution pipes
Using exploded view to rightly select the "T" piece
with threaded central for the water supply.
Put the seal into the plastic pipe in correspondence
of its groove.
Scratch the thread before wrapping the teflon tape around it.
Make sure to place the all assembling you have obtained in the right position
as shown in the picture with the water supply hole of the hose adaptor and the
water distribution hole of the plastic pipe top oriented
. Connect the water
distribution pipe in order to cover the system length. Connect the plumbing
kit hose adaptor to the water distribution pipes hose adaptor as shown in the
picture by mean of q.ty 1, plastic tube and q.ty 2 metal pipe.
Apply the PVC cement glue around the plastic pipe and spread it.
Join all the components as shown in the picture.
