12
© Munters AB, 201
8
3.5 Inserting the drains
Use Diagram 1 to decide on the placement of the
drains.
There should be one drain every 12m in 100mm
gutter thickness and every 12m in 150mm gutter
thickness.
Once the positions of the drains have been identified,
drill holes of ø 60 mm into the bottom gutter.
Put the rubber gasket on the threaded spout, then
insert the spout in the hole of the bottom gutter and
tight it in it's position by screwing the threaded ring
placed on the other side of gutter.
