© Munters AB, 2014
12
fig.5
Push the sleeve down the pipe, and fasten it with
8 pcs. of sheet metal screws 4,8x16 (N136-121)
and washers 5,3x15 stainless (02-420). Then push
the next pipe into the sleeve and fasten with 8 pcs.
of sheet metal screws 4,8x16 (N136-121) and
washers 5,3x15 stainless (02-420).
fig.6
Assembled pipes.
fig.7
Mount 3 pcs. motor fittings inside the pipe in rough-
bored holes.
(Figure illustrates motor suspension and cut of the
pipe).
fig.8
•
Fasten the fan on the shaft.
•
Mount the flange on the motor with 4 set screw
6x16.
Installation
Chapter5
