© Munters AB, 2014
31
Barring specific contractual terms, the following are directly at the user’s expense:
•
preparing installation sites;
•
providing an electricity supply (including the protective equipotential bonding (PE) conductor, in accordance
with CEI EN 60204-1, paragraph 8.2), for correctly connecting the equipment to the mains electricity
supply;
•
providing ancillary services appropriate to the requirements of the plant on the basis of the information
supplied with regard to installation;
•
tools and consumables required for fitting and installation;
•
lubricants necessary for commissioning and maintenance.
It is mandatory to purchase and use only original spare parts or those recommended by the manufacturer.
Dismantling and assembly must be performed by qualified technicians and according to the manufacturer’s
instructions.
The use of non-original spare parts or incorrect assembly exonerates the manufacturer from all liability.
Requests for technical assistance and spare parts must be made directly to the manufacturer, at the following
address:
Munters A/S
Nordvestvej, 3
9600 Aars, Denmark
Tel: +45 986 233 11
Fax: +45 986 213 54
[email protected]
Warranty
Chapter10
