IceDry 30
9. Connection with control panel cut
Figure 6.7 Window 5
6.5 Basic settings (windows 10-12)
Setting displays when commissioning or changing operating conditions. These can only be activated when
the mode switch is in position "
0
".
Hold down < for three seconds to switch to the basic setting displays.
Hold down < for three seconds or wait for 30 seconds to return to operating mode.
6.5.1 Display 10, Software information
This shows the software version of the control system. This number is most often needed when contacting
Munters Service.
Figure 6.8 Window 10
6.5.2 Display 11, Defrosting during operation
The required defrosting function is set here during operation.
Figure 6.9 Window 11
+000=No
Automatic defrosting not activated.
+001=Yes
Automatic defrosting activated (preset option, contact Munters Service before
changing this).
See also
.
190TEN-1049-H1307
Control system
22
Summary of Contents for IceDry 30
Page 3: ......
Page 40: ...www munters com ...