Munters IceDry 30, Original Instructions Manual

Page: 24 / 40

IceDry 30
6 Control system
6.1 General
The dehumidifier is provided with a programmable control system, which can be adapted to a certain extent.
On delivery, the system is set to standard values for operation in a cold store.
Figure 6.1 Control system panel
6.2 Structure
The system comprises a number of windows for operation (windows 1-5) and basic settings (windows
10-12). Normally, the basic setting component is only used to set basic values in conjunction with the initial
start-up.
6.3 Working with the control system
Figure 6.2 Keypad
Press > or < to page forward or back between the different operating windows.
Hold < depressed for three seconds to shift to the window for basic settings. Then press > or < to page
forward or back between the different operating windows. Press
∨
or
∧
to change the set value.
If you cannot find your way back to the start point, switch off the unit using mode switch. When the unit has
stopped completely, switch off the main power switch and then switch it on again. This resets the system.
The DEL, ALT, ESC, OK keys are only used for basic programming and for configuring the control system
and must not be used during normal operation.
19
Control system
190TEN-1049-H1307