- 2 -
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
When using pneumatic tools, basic safety precautions Should always
be followed to reduce the risk of personal injury Including the following:
READ AND FOLLOW ALL INSTRUCTIONS.
There are certain applications for which this tool was designed. we strongly
recommends that this tool NOT be modified and /or used for any application other
than for which it was designed. If you have any questions relative to its application,
please contact with your seller.
1. KEEP WORKING AREA CLEAN.
Cluttered areas invite injuries.
2. DON'T ALLOW CHILDREN AT THE
WORKING AREA
.
Don't let them handle the
tool.
3. USE SAFETY GLASSES.
To prevent eye
injuries, the tool operator and all persons in the
working area must wear safety glasses with
permanently attached, rigid, plastic side shields.
These safety glasses must conform to ANSI Z87.1
requirements (approved glasses have “Z87” printed
or stamped on them).
4 . USE EAR PROTECTION.
The working area
may be exposed to high noise levels that can lead to
hearing damage.
5. DRESS SAFELY.
Protective gloves and nonskid
footwear or safety shoes are recommended when
working with and operating this tool. Don't wear
loose clothing or jewelry. They can get caught in
moving parts. Also, wear a protective hair covering
to prevent long hair from getting caught in the tool.
6. ONLY USE CLEAN, DRY AND
REGULATED
compressed air at 70 to
120 PSI (5
to 8.3 BAR).
PARTS LIST
1
HCN086 Screw
52
HCN135 Washer
2
HCN087 Bushing
53
HCN136 Safe Sleeve
3
HCN088 Exhaust C over
54
HCN137 O-ring 6.4x1.8
4
HCN089 Seal
55
HCN138 Washer
5
HCN090 Muffler
56
HCN139 O-ring 20.3x2.5
6
HCN001 Screw
57
HCN140 O-ring 20.3x1.5
7
HCN091 Spring Washer 6
58
HCN141 Valve Guide
8
HCN092 C ylinder Cap
59
HCN041 O-ring 9.5x1.9
9
HCN093 Gasket
60
HCN142 O-ring 10.3x1.9
10 HCN094 Spring
61
HCN143 Trigger Valve Seat
11 HCN095 Valve Seat
62
HCN044 O-ring 12.8x1.9
12 HCN096 O-ring 48.8x2.5
63
HCN144 Spring
13 HCN097 Valve
64
HCN145 O-ring 5.5x1.5
14 HCN098 O-ring 67x3
65
HCN146 Trigger Valve Stem
15 HCN099 C ollar
66
HCN147 Tirgger Valve Guide
16 HCN100 C ylinder Seal
67
HCN148 Spring Pin 3x26
17 HCN101 O-ring 57.46x3.53
68
HCN149 Trigger Spring
18 HCN102 Piston Assembly
69
HCN150 Rotating Shaft Bushing
19 HCN103 C ylinder
70
HCN151 Locking Washer 3
20 HCN083 O-ring 65.4x2.5
71
HCN152 Trigger Assembly
21 HCN104 Restrictive Plate
72
HCN153 Steel Ball
22 HCN105 O-ring 101.91x3.53
73
HCN154 Spring
23 HCN106 Bumper A
74
HCN155 Rotating Shaft Pin
24 HCN107 Bumper B
75
HCN156 Locking Washer 28
25 HCN108 Body
76
HCN157 Cover
26 HCN109 O-ring 62.3x1.8
77
HCN158 Piston Bumper
27 HCN110 Nut
78
HCN159 Spring
28 HCN111 Washer
79
HCN160 O-ring 24.3x2.8
29 HCN112 O-ring 8.3x1.8
80
HCN161 Spring Pin 4x12
30 HCN113 Protector
81
HCN162 Piston
31 HCN114 Spring Washer
82
HCN163 O-ring 12.3x1.9
32 HCN115 Screw
83
HCN164 Feed Hook Seat
33 HCN116 Nose
84
HCN165 Feed Hook Pin
34 HCN117 Washer
85
HCN166 Spring
35 HCN118 Pin
86
HCN167 Feed Hook
36 HCN119 Handwheel Assembly 87
HCN168 Screw
37 HCN120 Spring
88
HCN169 Pin
38 HCN121 Feed Hook Pin
89
HCN170 Lower Nail Housing
39 HCN122 Stopped Hook
90
HCN171 Nut
40 HCN123 Spring
91
HCN172 Adjusting Stem
41 HCN124 Latch
92
HCN173 Spring Pin 2.5x17
42 HCN125 Safe Guide
93
HCN174 Adjuster Plate
43 HCN126 Spring Pin 3x28
94
HCN175 Spring
44 HCN127 Spring
95
HCN176 Adjuster Nut
45 HCN128 Screw
96
HCN177 Upper Nail Houshing
46 HCN129 Safe Bracket
97
HCN178 Washer
47 HCN130 Screw
98
HCN179 Screw
48 HCN131 Spring
99
HCN180 Soft Grip Sleeve
49 HCN132 Adjusting Button
100 HCN181 End Cap
50 HCN133 Adjusting Stem
101 HCN085 Air Plug
51 HCN134 Bracket