7
OPERATING INSTRUCTIONS
POWER:
Press the POWER keypad to turn the unit on/off.
MODE:
Press the "MODE" keypad to select the appropriate operating mode.
Select the operating mode from AUTO, COOL, FAN and DRY.
The green indicator light beside the "MODE" option will illuminate, identifying the mode selected.
When using the DRY and AUTO mode, you cannot select a fan speed. The fan motor
operates on LOW speed in DRY mode and on MED speed in AUTO mode.
TEMPERATURE SETTINGS UP:
Press the keypad to increase the set (operating) temperature of the unit.
Each time the keypad is pressed the temperature increases as follows:
O
O
1 C (Celsius Scale) Maximum Setting 30 C
TEMPERATURE SETTINGS DOWN:
Press the keypad to decrease the set (operating) temperature of the unit.
Each time the keypad is pressed the temperature decreases as follows:
O
O
1 C (Celsius Scale) Minimum Setting 17 C
FAN:
Press this keypad to activate the appropriate fan speed setting. Each depression of the
keypad will alternate through LOW, MED, HIGH fan speed options.
The green indicator light beside the FAN speed option will illuminate, identifying the fan
speed selected.
SWING (on some models):
Press the "SWING" keypad to activate the automatic air swing (oscillation) feature.
The green indicator light adjacent to the "SWING" keypad will illuminate, identifying to the
selected mode is operational. The vertical louvers will oscillate back and forth (side to side)
automatically sweeping air alternately for comfortable cooling. To stop the air swing feature,
press the "SWING" keypad again, the green indicator light adjacent to the keypad will go off.
Press the "SWING" keypad for 2 seconds will activate the SLEEP mode which can reduce
noise creating a comfortable sleeping environment.
When the SLEEP mode is activated, the green indicator light beside the "SLEEP" function
will illuminate.
NOTE
: The temperature display on the main unit can be changed between
"Celsius"
or
"Fahrenheit" by remote controller.
TIMER:
First press the Timer button, the indicator light besides word On illuminates. It
indicates the Auto Start program is initiated.
Press or hold the Up( ) or Down( ) to change the Auto time by 0.5 hour increments,
up to 10 hours,then at 1 hour increments up to 24 hours. The control will count down
the time remaining until start.
