mundoclima MUC-05-W9/CE, Service Manual

Page: 35 / 108

34
12.2 Storage conditions
Units in packaging may be stacked not more than four-layer, and must be kept under cover.
12.3 Units installation
Caution:
Installation must only be carried out by qualified technicians, trained to work with air-conditioning and refrigeration
systems. Incorrect installation could lead to unit malfunctioning and a consequent deterioration in performance.
For installation, follow the instructions set out below:
Check the space technically required for installation :
Œ
Space required for installation.
Œ
Space required for connecting the liquid lines and other valves.
Œ
Space required for connecting power supply.
Œ
Space required for connecting the unit to the external control panel (if any).
Œ
Space required for setting flow route and air inlet (for specific models).
Œ
Space required for correct and sufficient air flow.
Œ
Space required for removing condensate water.
Œ
Space required for cleaning the filter.
Œ
Space required for cleaning internal assembly and maintenance.
Remove the casing:
Removing screws
①
*2,
②
*2 and
③
*2 and then the casing as Figure 12.4.1.
Casing
assembly
Figure 12.4.1
Mark the places for screws on the wall according to the unit mounting holes or dimensions specified in Figure
12.4.2. The drain pipe for condensate water must be smooth enough to allow unobstructed water discharge.
As shown in Figure 12.4.2, fasten four screws (
①
) into a proper masonry structure.
Universal Fancoil DC MUC-W9 series