mundoclima CL20007, Installation And Owner'S Manual

Page: 34 / 84

When the water level of the bottom tray reaches
predetermined level, the digital display area
shows”P1”.
Carefully move the unit to a drain location,
remove the bottom drain plug and let the water
drain away .Reinstall the bottom drain plug and
restart the machine until the P1 symbol disappears.
Drain outlet
NOTE: Be sure to reinstall the bottom drain
plug before using the unit
*
NOTE: Make sure the hose is secure and there are no leaks. Direct the hose toward
the drain , making sure that there are no kinks that will stop the water
flowing. Place the end of the hose into the drain and make sure the end of
the hose is down to let the water flow smoothly. Do never let it up.
*
Water drainage
Drain outlet
(by gravity)
Remove the cap from the drain outlet (gravity) on the back. Anchor the hose
emptying the hole. Place the other end of the hose into the drain hose have
negative inclination.
The unit is capable of removing condensate itself, so it is not necessary to connect the drain,
however, if using the dehumidification mode or high humidity in the environment, it is recommended
to connect the equipment a drain of the opposite when the condensate tank is full the unit will stop
and shows "P1".
Drain connection:
34