mundoclima CL20007, Installation And Owner'S Manual

Page: 32 / 84

Circulation operation mode
1. Press MODE button in a sequence until the fan display is lighted.
2. Press the FAN button to select the fan speed.
3. Press the ON/OFF button to start the unit and press it again to stop.
Timer operation
1. Press the TIMER button .
2. Press the
“ + ” and “ - ” button to adjust your timer time.
Drying operation mode
1. Press the MODE button in a sequence until the dry display is lighted.
2. The fan will run at a fixed speed at this operation mode.
3. Close windows and doors for the best dehumidifying effect.
4. Press ON/OFF button to start the unit and press it again to stop.
Before starting the unit
1. Select a suitable location, make sure the unit is near to an electrical outlet.
2. Install the flexible exhaust hose and the adjustable window slider kit.
3. Plug the unit into a right outlet.
4. Turn the unit on.
Cooling operation mode
1. Press the MODE button in a sequence until the cool is lighted.
2. Press the “ + ” and “ - ” button to set your desired setting temperature.
3. Press FAN button to select the fan speed.
4. Press ON/OFF button to start the unit and press it again to stop.
display
Heating operation mode
1. Press the MODE button in a sequence until the heat display is lighted.
2. Press the
“ + ” and “ - ” button to setting your desired setting temperature.
3. Press FAN button to select the fan speed.
4. Press ON/OFF button to start the unit and press it again to stop.
Note: “ Time off ”
“ Time on ” is effective only when the air-conditioner is stopped.
is effective only when the air-conditioner is running.
Operation
Failure to follow the below precaution could result in electrical shock,
fire or personal injury.
1.The plug must be plugged into an outlet that is properly installed and
grounded.
2.Do not use an extension cord or plug adaptor with this unit.
WARNING
32