2
© Muncie Power Products, Inc. 2002
Introducing the
EOS-110 & EOS-111
The EOS-110 is an electronic switch that protects power
take-off and hydraulic equipment from operator abuse by
switching off the equipment when an excessive speed is
reached and automatically re-engages the equipment
when the engine slows to a safe speed.
The EOS-110 is equipped with a fail-safe circuit so that if
the input RPM signal is lost or not properly sensed via the
yellow wire, no output power will be available (via the green
wire) for the solenoid or clutch. This feature is beneficial in
obtaining the proper signal from the alternator and helps to
deter operator tampering.
The EOS-110 can be used as a direct replacement for the
previous model EOS-100. Refer to the installation and
adjustment procedures in this booklet and also, to the note
on Page 9.
The EOS-111 is a modified version of the EOS-110 and is
considered the same as the EOS-110 for installation pur-
poses as described in this booklet.