LEGAL202107V01
8
1
Modulframe
5
Bolt M8
2
Split Washer
6
Nut M8
3
Flat Wascher
7
Clamps
4
Mounting structure
Module can be installed in both landscape and portrait modes.
The modules must be properly secured to their support so that they can withstand live load conditions,
including positive and negative load, to the pressure they have been certified for. It is the installer's
responsibility to ensure that the clamps used to secure the modules are strong enough.
3.4.
Attachment guidelines
Select the proper installation method depending on the load (See below for more detailed information).
With different installation methods, the modules have been tested to withstand the loads of 2400 Pa,
3800 Pa and 5400 Pa according to IEC 61215 standard, equivalent of 1600 Pa (0.232psi), 2500 Pa
(0.363 psi) and 3600 Pa (0.522 psi) respectively under UL 1703 standard.
The diagrams in the tables below are designed for illustration purpose. For each installation, modules
can be installed either in portrait or landscape mode. If you integrate our obsolete products and need
advice, please contact München Energieprodukte GmbH, Customer Support Department for installation
instructions based on older manuals.
München Solar Modul Typ
Zelltyp
Modulgröße
MSMDxxxM2-30
156.75 Vollzellen
1640x992x35/40 mm
MSMDxxxM2-36
156.75 Vollzellen
1956x992x40 mm
MSMDxxxM3-30
158.75 Vollzellen
1665x1002x35/40 mm
MSMDxxxM3-36
158.75 Vollzellen
1980x1002x40 mm
MSMDxxxM3-60
158.75 Halbzellen
1684x1002x35/40 mm
MSMDxxxM3-72
158.75 Halbzellen
2008x1002x40 mm
MSMDxxxM6-60
166 Halbzellen
1765x1048x35/40 mm
MSMDxxxM6-72
166 Halbzellen
2108x1048x35/40 mm
MSMDxxxM10-60
182 Halbzellen
1916x1134x35 mm
MSMDxxxM10-72
182 Halbzellen
2279x1134x35 mm
