MUNBYN IPDA074, User Manual

Page: 11 / 44

08
Battery: It takes about 3.5 hours to charge the battery for the first
time through the adapter. The LED light will stay red when charging,
and when the battery is full, the LED light will start to stay green.
2.1 Charging time
The best operating temperature is room temperature 18~25
℃
.
The battery cannot be charged with the temperature lower than 0
℃
or higher than 50
℃
.
The battery cannot be charged with the temperature lower than 0
℃
or higher than 50
℃
.
2.2 Charging temperature
Using WI-FI service or data collection program will consume more
battery power than normal, please keep them off to save power
when you are not using the internet.
In order to avoid any inconvenience, it might cause you for battery
depletion, having a backup fully charged battery or connect the
device with power supply while working are highly recommended.
Note: If you do not use the product for a long time, please charge
the device at least once every two months.
2.3 Battery power supply
If the new device does not turn on, please make sure the insulation
sticker on battery has been removed.
If the battery is completely discharged, the device can’t be turned
on immediately. This is a normal phenomenon. Allow the depleted
device to be charged for a few minutes before power it on.
2.4 Notes for battery use
Since the battery only has a small amount of power for testing when
it leaves the factory, so please charge it before using it.The IPDA074
series device can also be charged with USB cable, device charging
dock and specified extended interface charging cradle.
Chapter 2 Charging the Battery