MUNBYN IPDA074, User Manual

Page: 15 / 44

12
Figure3-4 Applications settings
Loop count: To count and display the scan loops and sum the successfully
decoded or undecoded barcodes.
Loop scan: Automatically scan barcode continuously. if switch on
continuous lighting mode in Basic settings and then scan with continuous
lighting.
Interval: Set time delay between two scans.
Restore the barcode default settings: you can restore the barcode default
settings, as shown in Figure 3-5.
Barcode suffix: Add barcode output suffix on your own (They can be
numbers, letters, special characters, etc.).
Barcode prefix: Add barcode output prefix on your own (they can be
numbers, letters, special characters, etc.).
End Char: you can choose the barcode to end the output, including:
Enter, Tab, Space, None.
Code character: To select the output code character of the barcode,
including AutoDetect, Raw, GBK, GB2312, UTF8, BIG5, SJIS,
EUC_JP, ISO8859_1, and by default as AutoDetect
Barcode Send Mode: Select Focus, Broadcast, EmuKey or Clipboard
to send (Emukey needs the input which supports the hard keys), as
shown in Figure 3-6. End Char can be selected to send over keys in the
focus input mode.
Developer: Input password 888888 and then developer options can be
modified (not recommended).
Note: The advanced interface entry password is 4007770876 .
11
12
13
14
15
16
17
18
19
20