Page 31
Page 32
IMC01 Banknote Counter User Manual Version 1.09
IMC01 Banknote Counter User Manual Version 1.09
And program the file to the IMC01.
(4)
After finish the programming, unplug the USB Flash Drive and turn off the
machine.
(5)
Turn on the machine to enter the main interface. Software upgrade has been
finished.
After starting the machine, it will go on self-check automatically. If the preset
window shows the error code or tell you to clean the sensors, generally speak-
ing, it is because of dust on the surface or sensor blocked by notes. So please
clear the dust on the surface with brush or soft cloth, or take the notes away.
Then restart the machine.
For more troubleshooting methods, please refer to the IMC01 maintenance
manual.
(6)
7.0 Maintenance
Figure 6-3 Program the Upgrade File
Figure 6-4 Program Finish
