C
USTOM
I
NSTALLATION
17
Custom Installation
The Cell can be installed as a table in horizontal or tilted position. Follow the
instructions to complete custom installation of the Cell.
The Cell features an alignment rail found on the top, bottom and sides. The rail
can be used to align the Cell into a custom enclosure with M5 screws and align-
ment rail bits. The Cell is attached to the enclosure by the VESA screw holes. A
simplified custom setup would consist of sturdy supporting legs on each side,
firmly wrapping the Cell and keeping it at the
minimum safety distance 15 cm
(6 inches)
from the top of a stable surface.
DANGER: Never install a Cell inside a fully enclosed space! Risk of
device overheating, which can lead to critical hardware failure
and personal injuries.
• Ensure that the dimensions and setup of the custom enclosure
comply with the minimum safety distance requirement 15 cm (6
inches) above the stable surface and that the Cell has proper air venti-
lation (cool air in, hot air out).
CAUTION: Loosely installed Cell may fall and cause personal
injuries.
• Align the Cell with the alignment rail and the according bits. Attach
the Cell properly by the VESA screw holes. If the Cell is installed in a
public environment check the condition of the enclosure and attach-
ments regularly.
NOTICE: Any unauthorized modification of the Cell will void
warranty.
• The front glass may be changed in coordination with MultiTouch.
This requires explicit, signed warranty exception.
T
ASK
1.
Prepare the custom enclosure for the Cell.
