RPR 750IS Series
9261-7912 Issue 8
19
Low Battery Warning -
It is advised that this option is not
enabled for use with rechargeable cells.
The battery condition of your pager is continually
monitored and if a low battery voltage is sensed the pager
will continue to operate, but the battery must be changed
at the earliest opportunity (within 24 hours), or continued
operation and facilities cannot be guaranteed and some
features may be inhibited.
When enabled, this option may be programmed for visual,
audible and vibrate alert options. A warning may be activated
under the following conditions: -
(i)
at switch-on, the switch-on tone will be additionally
modulated by a buzz tone and the message
low battery
displayed;
(ii)
any alerts will be modulated with a buzz tone;
(iii)
the battery condition may be checked at any time,
using the
status interrogation
mode as described in
Section 11. The
low battery
message will be displayed
and then the pager will return to its quiescent state, with
the message
bat
continuously showing at the edge of the
display.
Call Comparator
- This option enables the pager to recognise
calls that are a repetition of a previous call, sent within a pre-
determined time after the original call. The pager will ignore
any repeated calls identified by the comparator. The time limit
can be programmed for periods of 30s, 120s and 300s after
the original call.
The exception to this will be for message calls, where the
original call has not been decoded with 100% confidence. In
this case the subsequent call will be accepted and will
overwrite the original message in the pager's memory. In both
cases however, a normal alert sequence will be generated.
