Multitone RPR 563GS, Technical Manual

Page: 26 / 87

RPR 563GS/KGS
TM1187A Issue C Page 2 - 10
Memory Replay
30. Incoming messages are automatically entered into the transceiver's memory store which
can accommodate up to five calls. To start the memory replay cycle, from the quiescent
display, press the
button twice. If in extended alert, press the key once only.
The transceiver displays the header of the first message (or the phrase "no messages"
if none exist). If no messages exist, the display returns to quiescent mode after
2 seconds.
31. New messages which have not been cancelled are displayed first. When all new
messages have been reviewed, the transceiver returns to quiescent mode. Once new
status has been removed it is possible to view all the messages in the memory by
pressing
again.
32. The header refers to the first message screen and consists of a time stamp, plus the
initial part of the message (or the whole message if 14 characters or less). Press
to step through each message header on the display. The most recent call is displayed
first and corresponds to the `1'.
33. The display automatically scrolls through messages at 1.25 second intervals until the
final screen is reached. The final screen terminates in ** (to denote the end of the
message) and is displayed for 2.5 seconds. If all messages have been viewed the
transceiver display returns to the quiescent condition.
Making a Call (Telephone-Style Operation)
34. The procedure for making a telephone-style call is as follows:
a) Press . The message "Please Wait" will be displayed. If the channel is clear
(base station not transmitting sub-audio tone) then the transceiver sends its Talk
code in DTMF. The transceiver then reverts to its quiescent state.
b) When the system is ready to service the call it sends a "Line Ready" call. The
transceiver rings, displays the message "Ready" and drops into telephone mode,
i.e. the transceiver audio volume will be adjusted to telephone speech level. Dial
tones from the system will normally be heard on the RPR 563KGS version.
c) Enter the required dialling sequence.
35. If, after a predetermined interval, the system does not respond with a "Line Ready" call,
the transceiver sends its Talk code again, and repeats this process at the specified
interval until a response is received from the system. If the
key has been pressed
and a Line Ready call is subsequently received, the transceiver still sends the Un-Talk
code and reverts to its quiescent state.
36. The line request can be cancelled at any time by pressing .