Multitone RPR 563GS, Technical Manual

Page: 25 / 87

Continuous Beep
Single Beep
Double Beep
Triple Beep
Single Pip
Double Pip
Triple Pip
Continuous Pip
Silent Alert
PIP/BEEP TONE ALERT PATTERN
4
1
3
2
6
7
5*
8*
9
BEEP CODE
RPR 563GS/KGS
TM1187A Issue C Page 2 - 9
Table 2: Beep Code and Alert Patterns
* The escalating alert and the Mute mode are overridden by beep code 5
(triple pip) and beep code 8 (continuous pip). They cause the alert to be on
full volume for the whole of the programmed alert time, or for four seconds
if it is a speech call.
NOTE: Silent Alert is not currently supported by Access 3000 systems.
Extended Alert
29. If enabled and the call is not cancelled, the transceiver enters extended alert after the
normal alert has finished. During extended alert, the LED flashes for 0.125s, every 2s.
Two 0.125s pips (2s apart) are emitted every two minutes (unless in Mute mode). The
pips are synchronised to the LED flashes.