MIT870 Series
31
Changing the Battery
When the battery is near the end of its operating life, the MIT870 is
programmed to provide a visual, audio and vibrate alert warning.
The normal audible beep alert will change to a different tone and the
Replace Battery
warning will be displayed on the
Standby Screen
:
The MIT870 pager will continue to operate normally for several
days. To ensure that calls are not missed, the old battery should be
replaced with a fresh AAA sized cell as soon as possible.
To remove the battery door, press and hold the battery door lock
"pip" on the back of your MIT870. At the same time, slide the
battery door off in the direction of the arrow. All of your messages
and settings will be retained while you change the battery, but to
ensure the retention of the clock settings, insert the new battery
within one minute of removing the old battery.
Insert the new battery in the direction as shown on the case back,
by sliding in the negative (-) end first. Slide the battery door back
into position so that it locks automatically with a click.
Dispose of the old battery carefully with consideration for the
environment and do not recharge, or incinerate alkaline batteries.
4:55 PM 12.09.06
No Unread Messages
Replace Battery
DOOR
LOCK
