MIT870 Series
24
The top line of the screen indicates the status of the alarm. When
the alarm is switched on, the second line shows the time and date
that the alarm will sound.
The selected item will flash. To select the next item, press the
X
button. Each press of the
X
button will advance the selection.
When the item you wish to change is flashing, press the
S
or
T
buttons to increase or decrease the value. Once you have set the
alarm, return to the
Standby Screen
by pressing and holding the
X
button for one second.
If your MIT870 pager is switched off at the selected alarm time, the
pager will turn on and the audible warning will sound, the
Alarm
text
will flash and the display will show the time and date. Press any
button to cancel the alert, or after 16 seconds the alert will cancel
and the MIT will switch off again. To switch the MIT870 back on
again, press
X
button for more than half a second.
