1. Construction
2. Battery installation
Before using the telephone it is important that you connect the battery to the connector in the battery box. Assem-
ble the back cover as described below and place the handset into the charger. It is recommended that you charge
2. Lift off back cover.
3. If the battery is not already installed, place battery plug
in the slot in the battery box.
4. Insert battery with the label readable and replace cover.
4
5
Key for internal calls
Keyboard LOCK
(Menu*)
MENU key
Display with backlight
Recall key
(MAIL key)
SILENT (Menu#)
ON/OFF HOOK key-
also used as turn ON key
CONFIRMATION key - OK
MUTE microphone.
MUTE ringer when ringing.
Long key press turns OFF.
Right arrow key, save number.
Telephone book menu from
standby text
Left arrow key, Redial menu
from standby text
Volume up/down
LED
Place the battery plug in the slot
with red wire closest to the mark
*
(see figure)
Multitone 9261-6733 iss 4 20/05/03 PCN5906 Side 3
STATUS
1. Push the back cover 5 mm towards the headset plug using your thumbs.
your handset for for 14-16 hours, prior to use.
