background image

 

SAFETY WARNINGS 

 

For your own and the device safety, you should obey the security warnings; 
1.  Read the user manual carefully. 
2. Read the safety warnings carefully. 
3. Remarks about Transport, Shipment and Preservation 
- During transport and shipment keep the product with its case. The case will protect the product against 
the physical damages. 
- Don’t put heavy weight on to the product or the product case. The product might be damaged. 
- In case of falling, the product might have permanent damage which will make it non-operational. 
- Deformation might be caused in case of extreme air conditions such as hot or cold weather. Life time of 
the electronic circuits tend to decrease in such conditions. 
4. Situations that might be dangerous to human or natural environment: 
- Beware of the sharp pointed edges of the case  
- Recycle the product case in the proper recycling bin.  
5. Maintenance of the product 
-  The  product  doesn’t  need  periodic  maintenance.  For  maintenance  and  repair  please  consult  to  the 
authorized services. 
- By rubbing with dry cloth, you can clean the product periodically. 
- You can keep the product in its case, when you are not using it. 
- Before cleaning the product, unplug the connection. Be careful that the cleaning material doesn’t contain 
any solvent such as alcohol, gasoline or thinner. 
 6. Place the product on a plain and stable wall. 
7. To prevent any kind of electrical shock, use the product with its original cable. 
8. Don’t put any foreign substance in the product. And don’t try to open it with  devices that might cause 
electrical shock. 
9. When maintenance and repair are practiced in places other than the authorized services, the product 
might be damaged.  
10. Remarks about the energy consumption of the product 
- The product is designed to work 24/7. Yet to prevent energy consumption, it should be unplugged when 
it won’t be used for a long period of time. The user should be aware that each of the terminal stations that 
are left on use energy that is not needed.  
In case of malfunctioning please consult to an authorized service. 

 

Summary of Contents for DIP-01












Reviews: