MultiVOIP FX Cabling Guide
Multi-Tech Systems, Inc.
7
configured identically, each channel is individually configurable. So, for
example, some channels of a MultiVOIP might use the FXO interface and
others the FXS.
5. Ensure that the unit is properly connected to earth ground by verifying that it
is reliably grounded when mounted within a rack.
This can be accomplished by connecting a grounding wire between the
chassis grounding screw and a metallic object that will provide an electrical
ground.
6. Turn on power to the MultiVOIP by placing the ON/OFF switch on the back
panel to the ON position. Wait for the
Boot
LED on the MultiVOIP to go off
before proceeding. This may take a few minutes.
Proceed to the chapter “MultiVOIP and Auxiliary Software” in the User
Guide. That chapter describes how the built-in MultiVOIP software (firmware)
is accessed using a web browser and a Java program that are both up-to-
date.
VOIP Configuration
When the cabling connections above have been made and the command PC
has been equipped with an up-to-date web browser and Java version, then
you are ready to contact the MultiVOIP through a browser and begin
configuration. For detailed instructions about configuration, see the User
Guide on your MultiVOIP CD. The Quick Start Guide chapter of the User
Guide is the best place to start.”
