manualshive.com logo in svg

Multitech MultiModem rCell MTCBA-E-EN2, User Manual, Page: 20 / 58

Share
Download
Multitech MultiModem rCell MTCBA-E-EN2 User Manual Download Page 20

Chapter 3 – Using the Web Management Software 

Chapter 3 – Using the Web 

Management Software 

 
The Web Management software configures the Ethernet functionality of your router.  
 

Navigating the Web Management Software 

This section explains the menu structure and the navigation buttons of the router’s Web Management software.   

Menu Bar 

 

IP Setup:  

Sets up a General Configuration, HTTP, DDNS, SNTP, Static Routes, and Remote Configuration. 

PPP:  

Sets up the PPP authentication,

 

dial-on-demand, router authentication, and Wakeup on Call. 

Networks & Services:

 

Defines networks and services to make them available to other functions such as allowed packet 

filters, static routes, remote configuration, DNAT, and GRE tunnels and routes.

 

Packet Filters:  

Defines filter rules, DNAT configuration, and ICMP rules. 

GRE Tunnels:  

Generic Routing Encapsulation (GRE). Defines the remote network and the tunnel through which traffic is to 

be routed.

 

DHCP Server:

 

Configures the DHCP server settings. 

Tools:  

Sets DDNS Force Update and Reset router, displays Service Status, and provides screens for  

Firmware Upgrade, Load Configuration, and Save Configuration. 

Statistics & Logs:

  

Shows statistics and logs maintained by the router. 

Save & Restart:  

Saves your settings and reboots your router. 

 

Help Index:  

Accesses the online Help text. 

 
IMPORTANT NOTE ABOUT 

SUBMIT

 AND 

SAVE & RESTART

 

Click the 

Submit 

button located at the bottom of most screens in order to save any changes you make.  

Then you must click the 

Save & Restart

 button, located on the Menu bar, in order for your settings to take effect. 

Save & 

Restart 

does not have to be executed after each screen; you can change and 

Submit

 several screens, and then click 

Save & 

Restart

.  

 
 

 

20 

Multi-Tech Systems, Inc. MultiModem rCell User Guide 

Summary of Contents for MultiModem rCell MTCBA-E-EN2



























































Reviews:

No comments