Chapter 2 – Activation and Installation
Multi-Te
11
ch Systems, Inc. MultiModem rCell User Guide
Chapter 2 – Activation and Installation
Activate Your Wireless Account
Please refer to the wireless account Activation Notices included with your unit and located on the MultiModem CD. Choose
the one for your wireless network provider and follow the directions to activate your account.
Phone Numbers for the router
Every wireless router will have its own unique phone number. The phone number may simply be given to you by your wireless
service provider or it may be on the SIM card or both. Wireless provider implementations may vary.
Note:
If you need remote access to your MultiModem over the internet for remote configuration, you need to ensure
that your wireless network provider has provisioned mobile terminated data and fixed or dynamic public IP address
inwhich they can configure the network to redirect any incoming connection to that predefined IP .
Insert the SIM Card into Holder, If required
The router requires the power supply connection to begin operation. It also requires a SIM card (Subscriber Identity Module)
to operate on a GSM network. To install the SIM, do the following:
1.
Using a small Phillips screwdriver, remove the two SIM door screws and remove the SIM door.
Note:
When changing a SIM, ensure that power is removed from the unit.
2.
Insert the SIM card into the card holder. The above graphic illustrates the correct SIM card orientation.
3.
Verify that the SIM card fits into the holder properly and then replace the cover.