3 Remote Configuration
12
MultiModemZPX User Guide
To Change the Remote Escape Character
To further improve security, you can change a remote modem’s remote configuration escape character
either locally or remotely. The remote configuration escape character is stored in register
S9
. The factory
default is 37, which is the ASCII code for the percent character (%). Setting
S9
to 0 (zero) disables remote
configuration entirely.
CAUTION:
If you do this remotely, you won’t be able to change it back remotely.
1.
Establish a remote configuration link with the remote modem as described in “Basic Procedure.”
2.
Type
ATS9=
n
, where
n
is the ASCII code for the new remote configuration escape character, and
then press E
NTER
.
3.
Save the new value by typing
AT&W
and pressing E
NTER
.
4.
Type
ATO
and press E
NTER
to exit remote configuration.
