9-MultiMobile
Hardware Installation
CHAPTER 2 - INSTALLATION
This chapter describes how to install your Ethernet PC
Card into your notebook computer and connect it to
the network. The PC Card can connect at 10Mbps
Ethernet over unshielded twisted pair (UTP) cable, or
using a thin net cable.
Please refer to Software Installation
in Chapter 3 for
installing network drivers using menu driven installa-
tion utilities.
*
: hardware installation must occur before driver in-
stallation is attempted.
Installing The MT10ZLX/E or MT10ZLX/E-T/2
Card(s)
1. Insert the MT10ZLX/xxx into the computers
PCMCIA slot with the 68-pin connector facing the
PCMCIA slot and the label facing up.
Figure 2-1. PC Card Installation
All manuals and user guides at all-guides.com
