Software Installation
28-MultiMobile
Examples of partial CONFIG.SYS file:
DEVICE=C:\CARDSOFT\SS365SL.EXE
DEVICE=C:\CARDSOFT\CS.EXE
D E V I C E = C : \ C A R D S O F T \ C S A L L O C . E X E
C:\CARDSOFT\CSALLOC.INI
DEVICE=C:\CARDSOFT\CARDID.EXE
device=c:\lanman.dos\drivers\ethernet\le100\lanen.exe
device=c:\lanman.dos\drivers\protman.dos /I:c:\lanman.dos
device=c:\lanman.dos\drivers\ethernet\le100\le100nds.dos
Examples of partial AUTOEXEC.BAT file:
SET
PATH=C:\LANMAN.DOS\NETPROG;%PATH%
NET START WORKSTATION
LOAD NETBEUI
The Ethernet function configuration information for the
DOS NDIS driver is contained in the PROTOCOL.INI
file. The section of the PROTOCOL.INI file that con-
tains configuration information for this card must be-
gin with [LE100NDS2_NIF]. The valid entries in the
file are listed below:
[LE100NDS2_NIF]
DRIVERNAME - LE100NDS$
this line must always be present
IOADDRESS - value
where value is one of 32 bytes boundary from 0x200 to 0x3e0.
The leading 0x for the hex notation is required.
To have Card Services select the address base
from its pool of available address then use a
value of 0.
INTERRUPT - value
where values is one of the following interrupts:
3, 4, 5, 7, 9, 10, 11, 12, 15.
To have Card Services select an available
interrupt resource then place a value of 0 at this
location.
All manuals and user guides at all-guides.com
