CONFIGURING YOUR DEVICE
32
MultiConnect
®
rCell 100 MTR-LTE User Guide
WAN Setup
Configuring WAN Failover Priority
Failover mode regulates which WAN is used for the Internet connection and switches the WAN if a connectivity
failure is detected.
Failover mode enables the WAN with the highest priority as displayed on the
WAN Configuration
page. If the WAN
with priority 1 is disabled or a connection failure is detected, the WAN with priority 2 is automatically selected for
establishing connection to the Internet.
If Ethernet is used as WAN, the DHCP server must be disabled.
1.
Click
Setup > WAN Configuration
.
2.
Under
Options
, click the up and down arrows to change the priority of the appropriate WAN.
3.
Click
Save and Restart
to save the change.
For field descriptions see
Failover Configuration Fields
For information on editing WAN Failover see
Editing Failover Configuration
Editing Failover Configuration
The device can use the active or passive mode to monitor the Internet availability in WAN. The default condition is
active mode.
Active mode can be type ICMP (ping) or TCP. ICMP periodically pings the designated host at the specified interval.
TCP tries to make a connection to the designated host at the interval specified.
For both ICMP and TCP, if a response is not received, the device switches to the WAN with lower priority. The
device continues to ping the designated host at the interval specified for WAN with the higher priority and
switches back when the ping is successful. When passive mode is enabled, the device switches the WANs when the
network interface is down. The currently active WAN is displayed on the home page under the label WAN
Transport.
To edit failover configuration:
1.
Click
Setup > WAN Configuration
.
2.
Under the
Options
column at the right, click the pencil icon (edit) for the selected WAN. The
Failover
Configuration
page is displayed.
3.
Make the desired changes. Refer to
Failover Configuration Fields
for details.
4.
Click
Finish
.
5.
If you are finished making changes, click
Save and Restart
.
Failover Configuration Fields
Field
Description
Monitoring Mode
Use the drop-down list to select the mode to connect to the host: PASSIVE or
ACTIVE.
Interval
Enter the number of seconds between each check. Default is 60 seconds.
Host Name
Enter the host name or IP address to use for the check. Default is www.google.com.
