CELLULAR INFORMATION
42
MultiConnect® OCG-E MT100EOCG-EV3 Developer Guide
Part Number
Description
Quantity
ANGPS-10MM
Mag Mount GPS Antenna, 5 Meter Cable
10
Activating Accounts for Cellular Devices
Some Multi-Tech products have been pre-configured to operate on a specific cellular network. However, before
you can begin to use the modem, you must set up a cellular data account with your cellular network provider.
Refer to Multi-Tech’s Cellular Activation Web site http://www.multitech.com/activation.go for information on
activating your cellular modem.
The cellular carrier asks you for device identification information:
For CDMA: The modem's MEID is printed on the label.
For EV-DO, the modem’s MEID is printed in hexadecimal format on the label.
For GPRS/HSPA+: The modem's 15-character IMEI (International Mobile Equipment Identity) number is
printed on the modem's label.
Refer to the device labels for the location of the device identification.
IMPORTANT: When the cellular carrier asks you to provide the modem's model identification, give them the Multi-
Tech model identification, not the host device model number. The Multi-Tech model identification allows the
carrier to verify the modem as one of its approved models. This information is located on the modem's label.
Cellular Approvals and Labeling Requirements
Approvals and Certification
The Multi-Tech SocketModem used in the product is an industry or Carrier Approved modem. In most cases, when
integrated and used with an antenna system that was part of the Multi-Tech modem certification, no additional
approvals or certifications are required (however, EV-DO has a few exceptions) for the device you develop as long
as the following are met:
The antenna system cannot be altered.
Model Identification The Multi-Tech model identification allows the carrier to verify the modem as one of its
approved models. This information is located on the modem's label.
Modem Label Examples
Example CDMA Label on End Product
