Chapter 2 – Activation and Installation
16
Multi-Tech Systems, Inc. MultiConnect AW User Guide
4.
Connect the RJ 11 phone cable to the DIAL connector on the unit and connect the other end of the
phone cable to the customer’s analog modem.
5.
Remove the protective shipping cover. Attach the appropriate input connector to the power supply
module by holding down on the slide lock and tipping the input connector to fit into the notch on
top of the module and then lowering it into the slide lock. Then release the slide lock.
6.
Screw-on the power lead from the power supply module to the power connection on the unit. Plug
the power supply into your power source.
Optional – Attach the Modem to a Flat Surface
The modem can be panel mounted with screws spaced according to the measurement shown.
Note:
Use either #4 or #6 pan head screws for all four mount locations.
