Chapter 4 – Device Configuration
32
Multi-Tech Systems, Inc. MultiConnect AW User Guide
Network Dependent
G) Remote IP
none
Remote IP
is the IP address of the device you are connecting to for
outbound. If you change the Remote IP, it becomes the new
default IP.
Phone Number/IP Conversion Table
Option
Default
Selection
J) View or change
Phone Number/IP
Conversion Table
This option allows additional connections to be added to the
Phone Number/ IP Conversion Table.
When a dialed number matches one of those in this table, the
default Remote Port and IP options are overridden during the call.
If the entry does not match, the default is used. For detailed
instructions on entering data in this table, refer to View or Change
Phone Number/IP Conversion Table in this chapter.
MultiConnect AW Security
Option
Default
Selection
Z) Enter Wireless
Modem Command
Mode
Select this to open the command port on the wireless modem to
enter AT commands.
View or Change Phone Number/IP Conversion Table
The Phone Number/IP Conversion Table allows you to use an analog (PSTN) phone number to look up an
IP address. This table can have five entries. When a dialed number matches a number in the table, the
default Remote Port and Remote IP options are overridden during the call.
To set up the Conversion Table, do the following:
1.
Enter
J
and press
ENTER
to go to the Phone number/IP Conversion Table.
2.
Type the number, 1-5 of the option you want to change and press
ENTER
.
3.
Type the
Server Port Number
and press
ENTER
.
4.
Type the
Server Phone Number
without dashes or spaces. This number should include the area
code, exchange, and extension. Press
ENTER
.
5.
Type the
Server IP
address for your cellular network and press
ENTER
.
When you press ENTER, the entry is saved to the Phone number/IP Conversion Table. You do not have
to press + to save your changes.
