HARDWARE AND INSTALLATION
CAUTION:
Use only the power supply provided with the device. Using any other power supply voids the
warranty and can damage the unit.
3.
Verify power.
The Power LED comes on immediately after power is applied.
4.
Use the USB cable to connect the USB port on your device to the USB port on your computer.
Attaching Power Supply Blades
Power Supply and Blades
If your device shipped with a power cord, attach the blades for your region.
Power Supply no
Power Supply with
Power Supply with
Power Supply with
blades
EU blade
NAM blade
UK blade
Attaching the Blades
To attach a power supply blade:
1.
Remove the power supply cover (not shown). To do this, slide the lock down and hold it while you lift off
the cover.
2.
Insert the latch on the blade into the notch on the power supply.
3.
Slide the lock down and hold it while you press the blade in place. Then, release it.
1 - Latch
2 - Notch
3 - Sliding lock
Cabling your Device to a Computer
To cable the device:
1.
Connect the power cord to an outlet or power strip and to the power adapter.
2.
Connect the power adapter to the 9V connector on the MTMC.
MultiModem
®
USB MTMC8-USB/MTMC16-USB User Guide
13
