background image

 

Multi-Tech Systems, Inc. MultiModem rCell User Guide  

59

 

 

Appendix B – Regulatory Compliance 

 

 

EMC, Safety, and R&TTE Directive Compliance 

The CE mark is affixed to this product to confirm compliance with the following European Community Directives: 

Council Directive 2004/108/EC of 15 December 2004 on the approximation of the laws of Member States relating to 
electromagnetic compatibility;  

and 

Council Directive 2006/95/EC of 12 December 2006 on the harmonization of the laws of Member States relating to electrical 
equipment designed for use within certain voltage limits; 

and 

Council Directive 1999/5/EC of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual 
recognition of their conformity.  

FCC Part 15 Class B Statement 

This equipment has been tested and found to comply with the limits for a 

Class B 

digital device, pursuant to 47 CFR Part 15 

regulations. The stated limits in this regulation are designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Plug the equipment into an outlet on a circuit different from that to which the receiver is connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

This device complies with Part 15 of the CFR 47 rules. Operation of this device is subject to the following conditions:  

(1) This device may not cause harmful interference, and  
(2) this device must accept any interference that may cause undesired operation. 

Warning

:

 Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the 

user’s authority to operate the equipment.

 

Industry Canada 

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. 
Cet appareil numérique de la classe B respecte toutes les exigences du Reglement Canadien sur le matériel brouilleur. 
 

Summary of Contents for MTCBA-EV1-EN3-N3

































































Reviews: