manualshive.com logo in svg

Multitech MTCBA-EV1-EN3-N3, User Manual

Share
Download
Multitech MTCBA-EV1-EN3-N3 User Manual Download Page 48

Chapter 3 – Using the Web Management Software 

48

 

Multi-Tech Systems, Inc. MultiModem rCell User Guide 

(0x100 through 0xfff is recommended). If you have more than one manual connection, 
then the SPI Base must be different for each one. 

Left Next Hop 

Next Hop

 is the address of the next device in a routing table’s path that moves a packet 

 

to it’s destination. This setting can be configured or left as a static value: 0.0.0.0.  When 

 

not configured, the value is set to the Gateway of the Box/Gateway configured on the 

 

Interface/Right IP. The selection is based on the Left and Right IP. 

 

Local WAN IP 

Select the Interface to initiate the IPSec tunnel (Left Security Gateway). 

 

Local LAN 

Select the internal subnet of the local security gateway for which the security services 
are to be provided. If the router acts as a host, this should be configured as 

None

. Other 

options are: Any, LAN, LAN Interface, WAN 1, WAN 1 Interface.

 

Remote Gateway IP 

Select the interface in which the IPSec tunnel ends. In the case of Road Warriors with a 

 

Dynamic IP addresses, this should be configured as 

ANY

. Other options include: LAN, 

 

LAN Interface, WAN 1, WAN 1 Interface, and None. 

 

FQDN 

FQDN is a Fully Qualified Domain Name that resolves to the Local Wan IP of the 
router or in the case of GRE/IPSEC, it is used to identify the Wan IP of the remote 
location. This is provided by your ISP or created by you if you are using a Dynamic 
DNS service. When FQDN is selected, the Remote Gateway IP should be left blank. 

Remote LAN 

This is the internal subnet of the remote security gateway for which the security 

services  

are to be provided. If the remote end is a host, this should be configured as 

None

.

 

NetBIOS Broadcast 

Check this option to enable broadcasts over the connection. It will allow computers on 
the network to share Microsoft file and printer sharing information.

 

Save Button 

Click the Save button to save these settings. 

 

 

Summary of Contents for MTCBA-EV1-EN3-N3

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands