Appendix A – Device Manager Utility
Multi-Tech Systems, Inc. MultiAccess ACS User Guide
39
7. The updating process will take as long as a minute. During this time, several messages will
appear in the
Update MultiAccess ACS N.N.N.N
window. A transient
TFTP
screen may
appear briefly. If the updating process has been successful, the final message line will say
“Finished – The MultiAccess ACS is ready.”
8. Close the
Update MultiAccess ACS N.N.N.N
window. In the main
Device Manager
window,
the updated version will be listed.
9. Repeat steps 1-8 for each MultiAccess ACS unit in the system.
NOTE
: For proper operation of the MultiAccess ACS system, including the sharing of the Local
Users data base data, the firmware version for all MultiAccess ACS units must be the same.
10. The updating process is now complete.