Video Grabber DGR-1000 User Manual - v. 1.4 (FW 1.9)
75
5.5.8.
confNtp (subsection 8)
In the following tables only
OBJECTNUMBER
part of the identifier (OID) is listed.
OBJECTNUMBER Name
Access
Type
Description
1
ntpTable
-
Table
NTP peers table
2
ntpTimeUpdate
read-write
Integer
Write 1 to trigger immediate
time update. Resets to 0 when
done.
The entries to the ntpTable have the following format:
OBJECTNUMBER Name
Access
Type
Description
1
ntpTableState
read-create Enum
State of NTP peer entry:
1 – active
2 – not in service
3 – not ready
4 – create and go
5 – create and wait
6 – destroy
2
ntpAddressType
read-create Enum
Type of IP address of the LAN
interface:
0 – unknown
1 – ipv4
2 – ipv6
3 – ip4z
4 – ip6z
16 – dns
3
ntpIpAddress
read-create String
IP address for NTP server
4
ntpBurstEnable
read-create Enum
Status of burst setting:
0 – disabled
1 – enabled
5
ntpIBurstEnable
read-create Enum
Status of iburst setting
0 – disabled
1 – enabled
6
ntpMinPoll
read-create Integer
Minpoll value <4;17>, should be
lower or same as maxpoll
7
ntpMaxPoll
read-create Integer
Maxpoll value <4;17>, should be
higher or same as minpoll