MULTISOFT DGR-1000, User Manual, Page: 63 / 83

Video Grabber DGR-1000 User Manual - v. 1.4 (FW 1.9)
63
5.4.5. staRtsp (subsection 5)
In the following table only OBJECTNUMBER part of the identifier (OID) is listed.
OBJECTNUMBER Name Access Type Description
1 rtspCodec read-only String Codec used:
H264 or LOSSLESS
2 rtspFramesOut read-only Counter Number of video frames on
RTSP output
3 rtpsIFramesOut read-only Counter Number of I-frames on RTSP
output
4 rtspSessionTable - Table Table listing active RTSP sessions
Example:
The OID for rtspCodec is
1.3.6.1.4.1.46236.1.2.5.1.0
as the OID is constructed in the
following way:
VIDEO GRABBER . SECTION . SUBSECTION . OBJECTNUMBER .
1.3.6.1.4.1.46236.1 . 2 . 5 . 1 . 0
The entries in the rtspSessionTable have the following format:
OBJECTNUMBER Name Access Type Description
1 rtspSession
AddressType read-only Enum Type of IP address of the RTSP
client:
0 – unknown
1 – ipv4
2 – ipv6
3 – ip4z
4 – ip6z
16 – dns
2 rtspSession
Address read-only String IP address of the RTSP client
3 rtspSession
Port read-only Integer TCP/UDP port of RTSP client
4 rtspSession
Type read-only String Protocol used:
TCP or UDP
5 rtspSession
BytesOUT read-only Counter Number of bytes sent
6 rtspSession
PacketsOut read-only Counter Number of packets sent
7 rtspSession
Uptime read-only Integer Number of seconds since
session start