MULTIQUIP Power WHISPERWATT DCA-45SSIU2, Parts And Operation Manual

Page: 44 / 160

PAGE 44 — DCA-45SSIU2 — OPERATION AND PARTS MANUAL (STD) — REV. #7 (06/13/07)
NORMAL SHUT-DOWN
To shutdown the generator, use the following procedure:
1. Switch the MAIN , AUX and GFCI circuit breakers
(Figure 61) to the “ OFF ” position (no load).
Figure 61. Main, AUX. and GFCI
Circuit Breakers (OFF)
EMERGENCY SHUT-DOWN SHUTDOWN
1. To shut-down the engine in the event of an emergency,
switch the
MAIN
,
GFCI
and
LOAD
(Figure 61) circuit
breakers to “ OFF ” position.
2. Turn the ignition switch key to the “ STOP ” position.
2. Push the engine throttle control lever inward (Figure 62)
to the “
LOW
” position.
3. Let the engine cool by running it for 3-5 minutes with no
load applied (circuit breakers in the off position).
4. Place the ignition switch (Figure 63) in the “ STOP ” position,
remove the key and store in a safe place.
Figure 62. Engine Throttle Control Lever (Low)
Figure 63. Ignition Switch (Off Position)
5. Remove all loads from the generator.
DCA-45SSIU2 — GENERATOR SHUT-DOWN PROCEDURE