PAGE 28 — DCA-45SSIU2 — OPERATION AND PARTS MANUAL (STD) — REV. #7 (06/13/07)
Output Terminal Familiarization
The “
Output Terminal Panel
” (Figure 8) is provided with
the following:
z
Three (3) 240V output receptacles, 50 amp
z
Three (3) Circuit Breakers 240V @50 amps
z
Two (2) 120V GFCI receptacles, 20 amp
z
Two (2) GFCI Circuit Breakers 120V@ 20 amps
z
One Main Circuit Breaker 250V @110 amps
z
Five (5) Output Terminal Lugs
Output Terminal Panel
The
Output Terminal Panel
(Figure 8) shown below is located
on the right-hand side (left from control panel) of the generator.
Lift up on the cover to gain access to receptacles and terminal
lugs.
NOTE
Terminal legs “
O
” and “
Ground
”
are considered
bonded grounds
.
Figure 8. Output Terminal Panel
DCA-45SSIU2 — OUTPUT TERMINAL PANEL FAMILIARIZATION
