MULTIQUIP MC94SH8 Operation And Parts Manual Download | Manualshive

Page: 7 / 80

background image

PAGE 8 —MC-94P/S CONCRETE MIXERS — OPERATION & PARTS MANUAL — REV. #4 (11/04/05)

Accidental Starting

ALWAYS

place the circuit breaker or power

ON/OFF switch in the

OFF

position when the

pump is not in use.

Respiratory Hazard

ALWAYS

wear approved respiratory

protection.

Equipment Damage Messages

Other important messages are provided throughout this manual
to help prevent damage to your mixer, other property, or the
surrounding environment.

ALWAYS

wear approved eye and hearing

protection.

Sight and Hearing hazard

MC-94P/S CONCRETE MIXER — SAFETY MESSAGE ALERT SYMBOLS

Safety precautions should be followed at all times when
operating this equipment. Failure to read and understand the
Safety Messages and Operating Instructions could result in
injury to yourself and others.

FOR YOUR SAFETY AND THE SAFETY OF OTHERS!

This Owner's Manual has been
developed to provide complete
instructions for the safe and efficient
operation of the

Multiquip

Model

MC-94P (Plastic) and MC-94S
(Steel) Concrete Mixers.
Before using these mixers,
ensure that the operating
individual has read and
understands all instructions in
this manual.

SAFETY MESSAGE ALERT SYMBOLS

The three (3) Safety Messages shown below will inform you
about potential hazards that could injure you or others. The
Safety Messages specifically address the level of exposure to
the operator, and are preceded by one of three words:

DANGER

,

WARNING

, or

CAUTION

.

DANGER:

You

WILL

be

KILLED

or

SERIOUSLY injured if you do not follow
directions.

WARNING:

You

CAN

be

KILLED

or

SERIOUSLY injured if you do not follow
directions.

CAUTION:

You

CAN

be injured if you

do not follow directions.

HAZARD SYMBOLS

Potential hazards associated with the Multiquip MC-94P/S
concrete mixers operation will be referenced with Hazard
Symbols which appear throughout this manual, and will be
referenced in conjunction with Safety Message Alert Symbols.

Rotating Parts

NEVER

operate equipment with covers, or

guards removed. Keep fingers, hands, hair and
clothing away from all moving parts to prevent
injury.

NOTE

This mixer, other property, or the
surrounding environment could
be damaged if you do not follow
instructions.

NOTE

Discount-Equipment.com

«
...
5
6
7
8
9
...
»

Summary of Contents for MC94SH8

















































































Reviews:

No comments

Related manuals for MC94SH8

Brand: 1010music Pages: 2

Brand: 1010music Pages: 4

ABS-Lock DH04 Series

Brand: ABS Pages: 4

Brand: Samson Pages: 2

Brand: A.HABERKORN Pages: 28

Brand: Bartscher Pages: 20

Brand: Bartscher Pages: 24

Brand: H&S Pages: 32

bionic power knee

Brand: Össur Pages: 2

BALANCE KNEE OM8

Brand: Össur Pages: 36

Brand: Össur Pages: 37

REBOUND DIABETIC WALKER

Brand: Össur Pages: 63

Brand: Össur Pages: 67

ECHODIA Babyscreen

Brand: Électronique du Mazet Pages: 65

Brand: Martin Pages: 202

Brand: Garmin Pages: 2

Brand: Softing IT Networks Pages: 54

Brand: Grundfos Pages: 43

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands