![background image](http://html1.mh-extra.com/html/multiquip/globug-gb3led/globug-gb3led_operation-and-parts-manual_1855064019.webp)
GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14) — PAGE 19
7. To retract tripod legs (Figure 20) and place in the
stow position, lift up on mast while pulling up on the
velcro strap. Continue pulling upward on the mast until
the tripod legs are fully retracted and are in the stow
position.
Figure 20. Retracting Tripod Legs
8. Once tripod legs are in the stow position, place velcro
strap (Figure 21) around all three tripod legs. Secure
tripod legs by inserting the male and female connector
ends of the strap into each other.
Figure 21. Velcro Strap (Closed)
LATCH
UPPER
LOWER
MAST
VELCRO
STRAP
BUCKLE
TRIPOD
LEGS
CLICK
OPERATION
9. Place tripod (Figure 22) inside protective carrying case.
Figure 22. Carrying Case
TRIPOD
PROTECTIVE
CARRYING
CASE
Summary of Contents for GloBug GB3LED
Page 30: ...PAGE 30 GB3LED LIGHTING SYSTEM OPERATION AND PARTS MANUAL REV 0 03 18 14 ELECTRICAL ASSY...
Page 32: ...PAGE 32 GB3LED LIGHTING SYSTEM OPERATION AND PARTS MANUAL REV 0 03 18 14 TRIPOD ASSY...
Page 34: ...PAGE 34 GB3LED LIGHTING SYSTEM OPERATION AND PARTS MANUAL REV 0 03 18 14 MAST ASSY...
Page 37: ...GB3LED LIGHTING SYSTEM OPERATION AND PARTS MANUAL REV 0 03 18 14 PAGE 37 NOTES...