MULTIQUIP GBC, Operation And Parts Manual

Page: 27 / 44

gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14) — page 27
maintenanCe
table 5. periodic Check and maintenance
Figure part CheCK item solution
Lamp
L1 Lamp (Base) Lamp base loose? Screw in securely. •
L2 Connector Cable disconnected or loose? Connect securely. •
L3 Lamp Holder Lamp holder loose? Replace. #
L4 Pipe Frame Pipe Frame skewed? Replace. &
L5 Lamp Defective lamp? Replace. •
Balloon
B1 Balloon (Envelope) Defective or dirty? Replace. •
B2 Zipper Broken? Replace. •
B3 Fan Motor (Blower) Not working properly? Repair or replace. $
B4 Buckle Broken? Replace. $
B5 T-handle bolt (balloon) Broken? Replace. •
Cart
C1 Outrigger Movement not smooth? Spray grease. $
C2 T-handle and wheels Improper movement? Tighten securely. $
C3 Bolt for handle Bolt loose? Tighten securely. $
C4 Brake pedal
Linkage not working correctly? Check, spray grease. •
Notch worn-out? Replace. •
C5 Stopper Damaged? Replace. #
C6 Front wheel pivot Does not turn smoothly? Check, spray grease. $
C7 Tires
Tire pressure not 35.5 psi (294 kPa)? Adjust. •
C8 Link for front shaft Linkage not working correctly? Spray grease. $
C9 Brake Not working properly? Adjust. •
C10 Lever Lever loose? Tighten securely. •
C11 Counterweight (Outrigger) Does not work smoothly? Spray grease. •
Electric
E1 Power cable Defective or worn cable? Replace. •
E2 Plug Damaged? Replace. #
• — Check daily # — Every 20 hours $ — Every 100 hours & — Every 500 hours