PAGE 20 — BS90C WALK-BEHIND TROWEL • OPERATION AND PARTS MANUAL — REV. #0 (9/4/15)
BLADE PITCH CABLE INSTALLATION
1. For trowels equipped with a
Standard
handle (SXHC),
simply turn the
star wheel
counterclockwise to pitch
the blades flat. This will release the tension on the blade
pitch cable (Figure 8).
Figure 8. Adjusting Cable Blade
Pitch (Standard Handle)
2. For trowels equipped with a
Quick Pitch™
T-handle
(QXHC), simply squeeze the trigger lock and push
the
T-handle
towards the engine to pitch the blades
downward. Pushing the
T-handle
towards the engine
will cause the blades to lay flat (Figure 9). This will
release the tension on the blade pitch cable.
Figure 9. Adjusting Cable Blade Pitch
(Quick-Pitch™ Handle)
INCREASE
BLADE PITCH
(CW)
DECREASE
BLADE PITCH
(CCW)
NO
PITCH
FULL
PITCH
T-HANDLE
TRIGGER
LOCK
WARNING
The
Quick Pitch™
T-handle
is under spring tension
and can snap in the direction of force (toward user) if
not firmly grasped which may cause bodily injury.
ASSEMBLY AND INSTALLATION
3. Remove brass set nut #1 from the blade pitch cable
end. See Figure 10.
Figure 10. Blade Pitch Cable
4. Thread the brass set nut #2 towards the cable as far
as possible. See Figure 10.
5. Insert the cable end through the yoke eyelet (Figure 11).
Tighten brass set nut #1 by hand to remove all the slack
from the cable.
Figure 11. Cable Yoke Attachment
6. Using a wrench, tighten the brass set nut #2 up against
the yoke boss. This will lock the cable in place.
7. Using a wrench, tighten the brass set nut #1 against
the yoke boss.
BLADE
PITCH
CABLE
BRASS SET
NUT #1
BRASS SET
NUT #2
BLADE
PITCH
CABLE
YOKE
YOKE
EYELET
BRASS SET
NUT #1
BRASS SET
NUT #2
Summary of Contents for BS90C
