14
www.multilaser.com.br
W Fit Foot Extensions
For proper operation, it is important that no object or material, such as carpeting, touches the bottom surface of the board. W Fit foot extensions
can be added to the Balance Sensors if you are using the board on thick carpet.
1. Turn the W Fit over and remove any dust or dirt from the Balance Sensors.
2. Carefully push the foot extensions straight onto the sensors. Make sure they are pushed on all the way to assure that the board will lay flat
and stable.
3. Returm the board to the normal operating position.
Troubleshooting
If the W Fit fails to operate, or operates incorrectly, follow the steps below before seeking assistance.
1. The W Fit does not respond.
. Make sure the power is turned on. The blue Power LED should be lit if the Power Button has been pressed. (The) Power Button faces away from
the TV.)
. Make sure the board has been placed correctly.
. Make sure the batteries have been inserted correctly and are not been depleted.
. Make sure the game you are playing is compatible with the W Fit.
. If, after verifying the steps above, the W Fit does not work, try the following:
1. Turn off the power of the Wii console with the POWER Button on the front of the console.
2. Unplug the power cord form the wall outlet for a few seconds, then plug it back in again.
3. Turn on the power of the Wii console.
4. Repeat the steps in this Operations Manual for setting up the board.
If the W Fit still does not work, follow the information at the bottom of this page.
2. Control of the W Fit is inconsistent or seems incorrect.
. Review the Instruction booklet for the game you are playing to make sure you are performing the correct actions for that game.
. Make sure the board has been placed correctly.
. Try using the W Fit foot extensions if you are using the board on carpet.
. Make sure there are no people or other objects between you and the Sensor Bar.
. Avoid interference from other devices. If communication seems to be affected by other devices (wireless LAN, microwave ovens, cordless
devices, computers) move to another location if possible, or turn off the interfering device.
W Fit foot extensions (x4)
Balance Sensors
js055_manual.indd 14
14/02/2011 12:12:18