10
www.multilaser.com.br
To prevent injury and/or to prevent damage to the W Fit or surrounding objects, follow these guidelines during gameplay:
. Be aware of your balance so that you do not slip or fall from the board. Avoid more movement than is needed to operate the game you are
playing.
. Do not wear shoes or socks while using the board. Playing barefoot should reduce the risk of slipping or falling. If your feet become damp
during gameplay, stop and dry your feet and the board before continuing.
. No more than one person should use the board at a time.
. Make sure you have adequate space between you and any other objects or people during game play. The manufacturer recommends at least
3 feet (1 meter).
. Avoid stepping or standing on the edges of the board.
. Always place the board on a flat, horizontal and stable surface. Do not use the board on slippery surfaces. If used on thick carpet, attach the
W Fit foot extensions included with the W Fit.
. Do not use the W Fit if you are under the influence of alcohol or any other substance which could affect your sense of balance or perception
and cause you to slip or fall.
WARNING - Injury Due to Pre-existing Conditions
Gameplay with the W Fit may require varying amounts of physical activity. Consult a doctor before using the W Fit if:
. You are or may be pregnant;
. You have heart, respiratory, back, joint or other orthopedic conditions;
. You have high blood pressure;
. You have difficulty with physical exercise;
. You have been instructed to restrict physical activity.
While using the W Fit, if you experience excessive fatigue, shortness of breath, chest tightness, dizziness, discomfort or pain, STOP USE
IMMEDIATELY and consult a doctor.
CAUTION - Damage to the W Fit
Observe the following precautions to avoid damage to the board:
. Do not use the board if you weigh more than 330 Ibs(150kg)
. Do not jump on the board our use excessive force when operating the game.
. For indoor use only. Do not expose the board to liquids or to extremes of heat or cold.
Components
. Front . Back
﹗
﹗
Foot / Hand area
Bumpers (x4)
Power LED
Lights Blue When the power is on
Power Button
Press To turn the power on or off.
NOTE: The power will automatically shut off
after a period of time if there is no activity
on the W Fit.
Hand Grips (x2)
Battery Cover
Balance Sensors (x4)
NOTE: If you are using
the W Fit on thick carpet,
you may need to use the
W Fit foot extensions for
proper operation
Synchro Button (SYNC.) (Inside Battery Cover)
For synchronizing the W Fit with the console.
6 Pin data port (Inside Battery Cover)For
adjusting the balance of pressure to the W Fit
before packing in the assembly line.
W Fit foot extensions (x4)
For use with thicker carpets. The foot extensions
can be attached to the Balance Sensors if the carpet
touches the botton of the board, which can interfere
with proper operation.
js055_manual.indd 10
14/02/2011 12:12:18
