Multilaser BB003, User Manual

Page: 9 / 12

Baby Digital Scale
// 9
Using the Product
Before using the Baby Digital Scale Multilaser , place it on a flat surface and check the batteries ( located at
the bottom of the product ) are securely fastened .
1. Press the On / Off button. After it connects , will appear briefly on the screen the weight of last use and
shortly after , opening a greeting ( “ Hello “ ) and only then , the product is ready for use . See diagram below :
2. Put a diaper or blanket on balance , leave it for a few seconds until the word “ HOLD “ appears on the left
of the screen . The “ HOLD “ appears , press the On / Off / Tare button to set the tare . That means to weigh
your baby, the Baby Digital Scale Multilaser will automatically subtract the weight of the diaper or blanket .
See diagram below :
3. Put the baby on the scale and wait a few seconds until the measurement is completed. After completion
of the measurement, the word “ Hold” appears on the screen .
4. Remove the child from the top of the scale.
TIP : Press the Music button! The soft music of Baby Digital Scale Multilaser may help to soothe
baby !
Precautions
• Do not knock the product .
• Avoid over weight. The recommended usage is up to 20kg .
• Replace the batteries whenever the word “ Lo “ appears on the screen
• Do not use it or store it in damp locations
• Do not immerse the product in water
• Control your Baby Weight here!